 |
|
|
| |
Concrete Removers |
|
|
Mortarman CR-650 Super Concentrate™
Works at a 3 to 1 dilution rate - most
cost effective product on the market!
Earth
Friendly Formula:
Biodegrades to carbon dioxide and water.©
Green
Technology: A super
concentrate means less energy to get
product to customer and less plastic
drums to produce or landfill.©
We supply automatic dilution and foaming
systems that produce a clinging foam
which makes the product more effective
and ensures it is not wasted by running
off on the ground. Plus, operator can
see where the product has been applied.
Safe on all surfaces: paint, rubber and
plastic seals, chromium, aluminum,
glass.
Directions for use: For
Best Results foam or spray the diluted
CR-650 onto the surface and allow to
remain until the concrete or cement is
soft. Rinse, scrape or brush the
mud-like residue off.
|
|
|
 |
| |
|
Available in 5 Gallon Pails,
55 Gallon Drums |
|
|
Mortarman Concrete Remover™
Mortarman™ is a heavy duty remover of
concrete, mortar and cement residues.
The product is very useful for cleaning
concrete mixer trucks. Mortarman™ is
also useful for removing these residues
from equipment such as concrete buggies,
mortar and cement mixer, finishing
tools, forms, scaffolding and lifts.
Mortarman™ is ideal for cleaning tankers
with cement and lime residues.
The active ingredients in Mortarman
Concrete Remover™ attack the metal found
in cement and turns the hardened
concrete and cement into a mud like
residue that can be rinsed or brushed
off with ease.
-
Softens Hardened Concrete
-
Contains No Toxic Acids
-
Environmentally Safe:
Biodegrades to Carbon
Dioxide and Water
|
-
Phosphate Free
-
Safe to use on all surfaces
-
VOC Compliant
|
Directions for use: To
remove hardened built-up concrete
residues, spray undiluted Mortarman™
directly on DRY RESIDUES. Saturate the
residues thoroughly. Allow product to
work for at least 15 to 20 minutes or
until the residues soften. Remove with a
brush or high pressure water rinse. For
equipment with heavy accumulations or
residues not previously removed by other
efforts: use a pressure washer equipped
with a turbo nozzle for best results.
|
|
| |
| |
|
 |
| |
|
Available in 5 Gallon Pails,
55 Gallon Drums,
220 Gallon Tote Tanks. |
| |
| |
|
Safety & Handling: Product
may cause eye or skin irritation. If
contact occurs, flush area with water
for 15 minutes. If irritation persists
seek medical attention. Ingestion
(swallowing) may be harmful or fatal. If
ingested, seek medical attention
immediately. Do not mix with any
chemical other than water. |
|
|
Mortarman One Shot™
Mortarman™ is a heavy duty remover of
concrete, mortar, and cement residues.
The product is very useful for cleaning
concrete mixer trucks. Mortarman™ is
also useful for removing these residues
from equipment such as concrete buggies,
mortar and cement mixers, finishing
tools, forms, scaffolding and lifts.
Mortarman™ is ideal for cleaning tankers
with cement and lime residues.
Earth
Friendly Formula:
Biodegrades to carbon dioxide and water.©
The active ingredients in Mortarman
CR-650 Super Concentrate™ attack the
metals found in cement and turns the
hardened concrete and cement into a mud
like residue that can be rinsed or
brushed off with ease.
-
Softens Hardened Concrete
-
Contains No Toxic Acids
-
Environmentally Safe:
Biodegrades to Carbon
Dioxide and Water
|
-
Phosphate Free
-
Safe to use on all surfaces
-
VOC Compliant
|
|
 |
| |
|
Available in 5 Gallon Pails,
55 Gallon Drums,
220 Gallon Tote Tanks |
| |
| |
|
Directions for use: To
remove hardened built-up concrete
residues, spray undiluted Mortarman One
Shot™ directly on DRY RESIDUES. Saturate
the residues thoroughly. Allow product
to work for at least 15-20 minutes or
until the residues soften. Remove with a
brush or high pressure water rinse.
For equipment with heavy accumulations
or residues not previously removed by
other efforts: use a pressure washer
equipped with a turbo nozzle for best
results. Dilute product 1-1 or 2-1 with
water to use as a truck and cab wash.
Safety & Handling: Product
may cause eye or skin irritation. If
contact occurs, flush area with water
for 15 minutes. If irritation persists
seek medical attention. Ingestion
(swallowing) may be harmful or fatal. If
ingested, seek medical attention
immediately. Do not mix with any
chemical other than water. |
|
|
|
 |
|
Copyright ©
1996-2009 - Fortrans,
Inc. - 7400 Siemens Road Wendell, North Carolina
27591 - All Rights Reserved |
|
 |
 |
|
|
|
|